you can create a single homogenous structure, the base belt can place in the vulcanizing press between its base plate, and a chevron mold plate positioned immediately below it. The base of chevron conveyor belts will already also have a specific quantity of uncured rubber on the top shield surface. It offers the volume of rubber required to achieve the minimum thickness of the top cover of the base conveyor belt once it has been vulcanized.

Avoiding The Rip-Off

The mold plate was used to create a ‘Single homogenous structure chevron belt.

The actual quantity of ‘extra’ rubber required depends on the design and depth of the chevron belt pattern. The density of the upper and lower plates then forces the supplementary rubber to flow into and fill the mold cavities. Vulcanization of both the base conveyor belt structure and the rubber-filled molds takes place instantaneously to form a single homogenous component.

Bearing the technical complexity and the higher prices involved, perhaps it is not surprising that apart from Dunlop Conveyor Belting, hardly any other note manufacturer produces a profiled chevron belt system in this way. However, the significantly superior strength, reliability, and longer working life created by chevron belting being made in this way make it worth the effort and worth the investment.

How Will You Know?

Chevron conveyor belt is with a single homogenous structure are robust and longer-lasting by far. You must know details about conveyor belting.

Even when the manufacturer’s arm understands the vast difference in strength and general durability between chevron belts ready using the conventional ‘two-step’ procedure and the ‘single homogenous structure.’ The dilemma then is how to create which kind is offered by the manufacturer or supplier providing the quote. Inappropriately, the only way to find out is to enquire the aspiring supplier and then hope that the salesperson you are speaking to essentially does know the difference!

Keeping A Low Profile

‘High’ profile chevron conveyor belts are present in various sizes, heights, mostly 16mm, 25mm, and 32mm. Some conveyor belting manufacturers only make the 25mm version. Though, several conveyor belts on the market have profile designs that are little more than 5mm high and sometimes lesser. Belting of this kind, you can mainly transport packaged things such as boxes, bags, baggage, and bulk materials. These include agricultural products, oily materials, woodchips, and wet sand, and you can use it successfully on inclines as steep as around 30° in some cases. You must know the basics of conveyor belt systems and leading chevron conveyor manufacturers and suppliers.


Chevron conveyor belt is deliberate for inclined transportation for conveying bulk material like crop, coal, sand, mineral, package, and bag dependent on different loading material and horizontal angle to select suitable cleat height and chevron type to avoid loading material from dropping down.

Ports and transshipment operations



Wood industry

Coal-fired power plants

Recycling industry

Sand and gravel industry


Leave a Reply