Conveyor belts, the prevalent pulley-operated machines found in production lines, baggage checkouts, cargo loading and unloading vehicles, escalators, and ski carriages, need a lot of maintenance. These machines are in top condition for ideal performance and safety. You can attribute much of the damage to deposits of dirt and grease on them. Therefore, cleaning these conveyor belts with a conveyor belt cleaner is obligatory. The conveyor belt maintenance is necessary; it improves your functions or production.

Conveyor belting systems are a reliable, rate-effective means of moving packages. They can help warehouses, distribution centers, and post garages load and unload transport vehicles, move goods by automated sortation systems, and demonstrate invaluable industries with speed and efficiency objectives.

Pressure cleaning systems are among the most effective conveyor belt maintenance equipment. These conveyor machines have high-pressure levels, high temperatures and are ideally suitable to withstand the rigors of commercial cleaning. The only thing to remember is that any conveyor belt cleaner you use needs to be designed specifically for commercial applications. Low-end machines intended for limited use cannot offer the level of cleaning that heavily muddy it needs.

You can choose equipment for cleaning on the following based criteria:

Flow Rate

Before you buy a conveyor belt cleaner, consider the drainage capability in the area. Use machines with reasonable flow rates of about 2-3 GPM if drainage is not enough. It may allow the transfer of less water onto the surfaces and create the cleaning process faster. Where there is no limitation on water use, particularly in outdoor areas, you can use machines with flow rates of approximately 5 GPM.

Power Method

Several contractors use an electric industrialized pressure washer to remove grime from conveyor belts. However, in the experience where electricity is not available, you will want to use an industrial pressure washer that works on propane, diesel, or gas. Modern versions use noise reduction mechanisms. Machines that need diesel or gas for either running the engine or heating might emit fumes. If you plan to use them for cleaning indoor areas, ensure the machine has a long hose. Several industrial pressure washer models have hoses around 50 feet.

Portability

You can buy a portable pressure washer if your contract needs you to carry out cleaning in different locations, or your work will extend out over a large area. It is one that you can fit on a trailer easily. You can carry these machines easily to different locations.

If you are necessary to clean a smaller area daily, like the assembly line and surrounding area, you may invest in a stationary pressure wash system.

Heat

A hot water pressure cleaner is necessary when you are planning to remove layers of grime, particularly grease and fat, from your conveyor belts. It can attain very high temperatures, around 210°F.

A steam pressure washer can attain temperatures as high as 330°F. Hence, you can use a steam pressure washer with heavy layers of grease and the same substances coating the conveyor belts.

You must buy Pressure wash systems only from well-known brands with good reputations. A high-quality conveyor belt cleaner is a good safeguard against the heavy accumulation of dirt and grease.

Leave a Reply